FAQ
Manual device restart using a magnet:
If the “Gira G1” stops reacting, you can restart the “Gira G1” using a commercially available magnet:
- Place the magnet in front of the Gira logo of the “Gira G1” for approx. three seconds.
- The “Gira G1” restarts, the configuration is retained.
The inscription labels can also be removed or swapped by customers relatively easily without having to use any special tools. To remove or swap an inscription label, follow these steps:
- Remove the call-button cover plate, using a screwdriver for example.
- Remove the inscription label.
- Affix a new inscription label, if required.
- Reattach the call-button cover plate.
Basic system information for Gira door communication can be found here.
Electrical devices may only be installed by a qualified electrician. Please see the information at https://www.gira.de/service/bauherren/installationshinweis.html
If you are looking for a suitable door intercom system, the Gira door communication configurator can help you make the right choice. This practical online tool provides step-by-step guidance to make sure you choose the right system to meet your individual needs. It helps to make your decision easier and supports you in choosing the right intercom system for both indoor and outdoor use. Click the link below to try the configurator and find out more useful information.
To forward a call to a mobile phone, you will also need the DCS-IP gateway, item no. 2620 9x, and a DC 24V power supply, item no. 1296 00. Older DCS-IP gateways can also be used for this, following a firmware update.
Electrical devices may only be installed by a qualified electrician. Please see the information at https://www.gira.de/service/bauherren/installationshinweis.html
Can’t find what you were looking for?
Please
call us
We're happy to help.
+49 2195 602 6996
Monday to Friday 7.30 AM to 8.00 PM
Saturday from 8.00 AM to 12.00 PM