Gira surface-mounted home station video Plus

Featuring image memory and polyphone ringtones

The Gira surface-mounted home station video Plus has a homogeneous front and features a state-of-the-art 5.6 cm (2.2") TFT colour display. Thanks to its capacitive sensor technology, it can be conveniently operated by lightly touching the buttons. To ensure greater operating reliability, internal calls and switching actions can be provided with individual names. The hands-free speech function is so sensitive that the speaker does not have to stand directly in front of the microphone to be understood.

In addition to the features of the Gira surface-mounted home station video, the surface-mounted home station video Plus has extra functions for even more ease of use. The local image memory can be reviewed to see who rang the doorbell while you were out. Customised polyphonic ringtones can also be saved on the integrated microSD memory card.

  • Can be integrated into the Gira design lines
  • Operating buttons with capacitive sensor technology
  • Speaker with connectable microphone
  • Automatic call acceptance for internal calls
  • Local image memory
  • 5.6 cm [2.2“] TFT colour display
  • Status display and menu navigation in the display
  • Automatic door opener
  • Ten polyphone ringtones can be saved
  • Card slot for microSD memory card

Can be integrated into the Gira design lines

Integration into the Gira design lines facilitates the uniform appearance of the door communication system and electrical installation. Available for the Gira Standard 55, E2, Event, Esprit, ClassiX, and E22 design lines, as well as the F100 design line. If desired, the home station can also be installed without the frame.

5.6 cm [2.2“] TFT colour display

The state-of-the-art 5.6 cm [2.2"] TFT colour display offers good visibility from various angles of vision and a high depth of focus, especially when visitors are standing a little further away from the door. In addition to this, system settings can be made via an on-screen display, similarly to the way they are set on televisions. The display is activated automatically as soon as someone rings the doorbell, but can also be switched to manual operation.

Operating buttons with capacitive sensor technology

A special feature of the Gira surface-mounted home station video Plus is its homogeneous front with the integrated operating buttons. The operating buttons feature capacitive sensor technology and react to the slightest touch.

Speaker with connectable microphone

The intercom unit is equipped with an echo suppressor. The microphone is automatically activated at the location where the level is higher. If ambient noise at the front door is particularly high, the person at the home station can activate the microphone with an override function by pressing a button.

Automatic door opener and automatic call acceptance for internal calls

Both features are optionally enabled by the electrician and can then be activated via the menu. The functions are very convenient, e.g. for medical practices, and enable doors to be opened automatically as well as speaking or listening directly in a room, e.g. from the reception to the doctor's consulting room and vice versa.

Local image memory

Depending on the settings, up to three images are taken and saved whenever the doorbell is rung. This allows you to see who was at the door after periods of absence. If desired, images can also be recorded manually during a conversation.

Card slot for microSD memory card

Up to ten customised polyphone ringtones can be saved on the integrated microSD card. During installation, the microSD card is inserted at the rear of the unit so as not to disturb the harmonious appearance.

Installation

The Gira surface-mounted home station video Plus can be easily installed in two steps: during the rough installation, the base plate is first mounted on the wall with the connection terminals. Pre-wiring can thus be carried out without the device. The home station is later locked directly onto the mounting plate, establishing automatic contact with the device.

Brochure
Gira door communication system

Order/download free of charge

Technical data

Power supply:

26 V DC ± 2 V (bus voltage)

Connections:

2-wire bus:
2 screw terminals

floor-call button:
2 screw terminals

additional power supply:
2 screw terminals

Temperature range:

0ºC to +50ºC

Dimensions:

W 55 x H 127 x D 21 mm

Colour system TFT colour display:

PAL

Screen diagonal:

5.6 cm [2.2"]

Screen resolution:

320 x 240 (H x V), QVGA

Installation type:

Surface-mounted

The delivery results subject to countries specific assortments

Door communication

TOP

Gira uses cookies for websites in the gira.com domain. By using our website, you agree to the use of cookies. Our Data Protection Declaration contains more information about the cookies used by us or third parties and the ways in which you can deactivate cookies.

Ok