Gira room temperature controller with additional cooling program

Due to the favourable energy balance, heat pumps are being used more often in residential construction. These devices are not only used for heating, however, but also for the cooling of buildings. The Gira room temperature controller with clock offers a special cooling program in addition to the previously integrated heating programs.

Switching between heating/cooling is done through an additional input, which analyses the heat pump's 230 V signal.

Operation/function

Self-explanatory user guidance facilitates the operation of the Gira room temperature controller with clock and cooling program. Four different temperature levels can be defined:

  • a comfort temperature for presence,
  • a reduced temperature for the night,
  • an anti-freeze temperature for times of extended absences,
  • a separate program for the cooling function.

The changeover to 'heating' or 'cooling' operating mode occurs automatically via a separate input. In addition, the device has self-teaching heating optimisation.

Functionality

The room temperature can be regulated in various ways: using an internal and/or external temperature sensor as a room temperature controller, as a floor temperature controller or as a floor temperature limiter.

Technical data

Rated voltage

230 V, 50 Hz

Switching capacity

N conductor required 8 (4) A,
1 NO non-isolated (relay contact)

Temperature range

+10°C to +40°C
(comfort/night reduction)
+5°C to +15°C
(anti-freeze temperature)

Ambient temperature

0°C to +50°C

Further functions and options

The time program with up to 32 switching points allows the room temperature to be accurately controlled. The display can be toggled between 12 and 24 hours. The changeover from summer time to winter time and vice versa is controlled by a saved date. Various potential settings ensure optimal air conditioning in the building: 

  • Energy-saving function for manual activation of the night-time reduction until the next switching point,
  • Party function for spontaneous extension of the heating phase, e.g. during the evening: After the extension has expired, the set time programme automatically becomes active again,
  • Holiday function for constant temperature reduction during a specified period: whereby the beginning and end dates of the absence are set. Holiday programming is automatically deleted after the period entered has expired, so that this programming is not repeated every year.
The delivery results subject to countries specific assortments

Air conditioning/heating control

TOP

Gira uses cookies for websites in the gira.com domain. By using our website, you agree to the use of cookies. Our Data Protection Declaration contains more information about the cookies used by us or third parties and the ways in which you can deactivate cookies.

Ok