Gira automatic control switch

Gira automatic control switch, Gira Esprit, black glass/colour aluminium

Practical and helpful particularly in transit areas such as hallways and staircases: the Gira automatic control switch. It ensures that the lighting switches on automatically when a person enters the room and switches off again when that person leaves the room. The device can be quickly installed: The Gira automatic control switch is simply inserted into the flush-mounted device box in place of the previous switch.

A water-resistant and theft-proof variant from the Gira TX_44 design line is available for outdoors, such as cellar stairs or the garage.

System 2000 standard top unit

The Standard automatic control switch top unit can be used with a variety of System 2000 flush-mounted inserts, e.g. with a relay insert to switch on/off light bulbs, fluorescent lamps and halogen lamps, or with a Triac switching insert for switching on/off HV and LV halogen lamps for wound transformers. If the top unit is installed in an HVAC relay insert, it also switches the heating and ventilation on/off in addition to the lights. The automatic control switch top unit can also be linked to other automatic control switch top units using an auxiliary insert.

The brightness switching threshold can be adjusted from approx. 0 to 80 lux and brightness-independent switching for day mode can be set by means of a potentiometer on the device. The power-on time of approx. 2 minutes is fixed. The sensitivity can also be set and changed individually, meaning that the top unit can be optimally adjusted to take account of influences by lighting systems of neighbouring areas and other interference, and is suitable without restrictions for automatic lighting control in large auxiliary unit systems.

The Standard automatic control switch top unit is available for installation heights of 1.1 m and 2.2 m. 

System 2000 Komfort top unit

In addition to the System 2000 inserts for switching on/off various lamp types and the HVAC relay insert for lighting and heating or ventilation applications, the Komfort automatic control switch top unit can also be used with System 2000 dimming inserts. A dimming function in the Komfort automatic control switch top unit ensures that the light is dimmed for a period of 30 seconds before being switched off, an advance warning that is particularly important in a staircase. In addition, a dimming value can be stored via an auxiliary unit and used by the automatic control switch to switch on the lighting.

The Komfort automatic control switch top unit has digital signal analysis for improved detection behaviour and optimised interference signal suppression. And a teach-in function also allows the current light intensity to be easily saved as the limit. The brightness switching threshold (0 - 80 lux), sensitivity (100% - 20%), overrun time (10 s - 30 min.) and brightness-independent switching for day mode can be set using potentiometers on the device.

The Komfort automatic control switch top unit is available for installation heights of 1.1 m and 2.2 m.

Impulse insert

The System 2000 automatic control switch top units can also be operated with the System 2000 impulse insert for motion-dependent light control, e.g. in stairwells. When activated, the impulse insert sends a pulse to the timer in the distributor, which then switches on the light for a specified time. The response threshold for each device in the lighting system can be individually set to suit the ambient conditions using the potentiometers for initial switch-on brightness in the automatic control switch top unit. The power-on time is set centrally at the automated timer in the distributor cabinet.

Up to eight impulse inserts can be connected to one automatic DRA here. If only six automatic control switches with impulse inserts are used, any number of non-illuminated rocker buttons can also be connected for semi-automatic light control.

HVAC control

Both System 2000 automatic control switch top units can be used with the HVAC relay insert from System 2000 to control the heating and ventilation in addition to the light. The HVAC relay insert has two relay contacts for this purpose. When the automatic control switch detects motion, the light is switched on via the first non-isolated contact. If it detects further movement, the heating or ventilation is activated via the second potential-free contact after three minutes.

The overrun time for controlling the heating or ventilation can be extended past the normal overrun time for motion detection. In contrast to the lighting channel, it operates without a lux analysis in order to ensure correct control of the heating or ventilation even when sufficient daylight is still available.

Technical data

Angle of detection

180°

Temperature

-20°C to 45°C

Protection type

IP 20

Protection type for TX_44 variant

IP Range for mounting height 1.10 m

- front 10 m - side 2 x 6 m

Range of automatic control switch
for high installation areas for mounting height 1.10 m

front 6 m, side 2 x 3 m

of automatic control switch
for high installation areas for mounting height 2.20 m

front 12 m, side 2 x 6 m

Download

Radio automatic control switch

Operating manual.

Bestell-Nr 1306 ..

PDF, 1,8 MB

Download

Automatic control switch for high installation areas comfort top unit

Operating instructions, System 2000.

Bestell-Nr 0671 ..

PDF, 191,9 KB

Download

Standard top-unit automatic control switch

Operating instructions, System 2000.

Bestell-Nr 1301 ..

PDF, 111,7 KB

Download

Automatic control switch comfort top unit

Operating instructions, System 2000.

Bestell-Nr 0661 ..

PDF, 480,1 KB

Download

Standard top-unit automatic control switch

Operating instructions, System 2000.

Bestell-Nr 1300 ..

PDF, 338,2 KB

Download

Gira for the home

Planning tool for intelligent electrical installations Order no. 1911 90

Bestell-Nr 1911 90

PDF, 1,9 MB

Download

Automatic lighting control

TOP