Gira dimmers

It's so easy to create the right lighting effects. Just a light and short tap with a finger is enough to switch the light on or off. If you want to dim the light continuously, a longer touch on the rocker is sufficient. Touching the upper area makes the light brighter and the lower area darker accordingly. You don't want to adjust everything over and over again? Then simply save your favourite lighting scene conveniently.

Easier and more energy-saving than you think: with the Gira rotary dimmer you can easily dim your light bulbs, halogen and LED lamps by hand, create the right lighting effects in no time at all and save energy all at the same time. The soft start means you can switch on the light gently and thus protect the bulbs. In order to prevent the dimmer from being destroyed in the event of a short circuit or overload, every Gira rotary dimmer is specially protected with electronic short-circuit protection and automatic overtemperature protection.

The Gira touch dimmer responds to a gentle touch because it works with capacitive sensor technology which responds to even the slightest contact. You simply activate it by touch and the last selected brightness level lights up, while a pleasant acoustic signal sounds to confirm this. You decide which lighting effects you would like and simply touch this dimming level – the corresponding LED point on the touch surface. To confirm your choice, the corresponding LED lights up. Of course, you can also switch directly to another dimming setting at any time or make spontaneous selections by sliding your finger over the dimming levels. By touching the lower operating surface for four seconds, the Gira touch dimmer stores the currently set brightness level as a memory value. To switch it on directly later, simply touch the lower button.

Of course, you can also conveniently control two lights or even groups of lights independently of each other with one pushbutton dimmer. Gira offers a dual function in one control unit for something you would otherwise need separate dimmers. Retrofitting is not a problem either: An existing series switch can simply be replaced with the Gira series dimmer. The Gira series dimmer is available for all Gira design lines.

Would you like to install a DALI enabled lamp? The DALI rotary dimmer provides brightness and colour temperature control for luminaires with a DALI interface. The transition is extremely easy. The DALI rotary dimmer can be installed in place of an existing switch or dimmer. Owners of a Gira rotary dimmer can continue to use their existing cover and frame (Gira System 55 or Gira F100).

The intuitive operation — turn and push — works like a normal rotary dimmer. Push to switch the light on or off. Turn the knob to adjust the brightness and turn the pushed knob to adjust the colour temperature.