FAQ
Gira X1 master password
Is there a master password in case I forget my password?
No, after a factory reset, the password on the device remains activated.
For end-customers, the device password should be in the documentation provided by the electrical engineering firm. If this is not the case, please contact your specialist installer as the device is built-in and therefore you cannot access it.
If you have updated the firmware of the device for which you have not yet received a password, the new password after the firmware update will be “device”.
Relevant Products
Gira X1 – one mini server to control your entire Smart Home
Designed for houses with KNX technology, the compact Gira X1 server allows you to control a variety of smart functions. More about the product ⇨
Similar Questions
Up to 50 scene sets can be created in the Gira X1.
Each scene can then be triggered by up to ten trigger points.
You can create one administrator, one installer and up to 62 users in a project.
Yes, scenes can be taught in by any user; this function must not be deactivated or password protected. As of (GPA 2.2; firmware 1.1516)
The X1 does not have the functionality of a KNX IP router. It is integrated as a KNX device into the bus and can be programmed and operated via IP (via the app).
A factory reset can be performed on the device on-site. Following this, the device password affixed to the device is reactivated.
Perform a factory reset as follows:
- -Disconnect the power supply
- -Hold down the programming button and connect the power supply
- -Hold down the programming button until both LEDs flash at the same time
- -Briefly release and re-press the programming button until the LEDs flash quickly
- -The factory reset is complete.
Can’t find what you were looking for?
Please
call us
We're happy to help.
+49 2195 602 6996
Monday to Friday 7.30 AM to 8.00 PM
Saturday from 8.00 AM to 12.00 PM