The S-Color system items are available in:
- black - similar to RAL 9005
- grey - similar to RAL 7038 - pure white - similar to RAL 9010
- red - similar to RAL 3003
- blue - similar to RAL 5013
Note: Gira S-Color system items are also available in yellow and green until December 2005 to cover any add-on and replacement needs.
All inserts from the System 2000 and System 3000 are suitable for use in the System 55 and are compatible with the Standard 55, Event, Esprit, E3, E2, Studio, ClassiX, TX_44 and E22 programmes.
A “reset” returns the controller to its delivery status. To do this, press the + (plus) and - (minus) buttons at the same time for more than 10 seconds. Following this, a display test is automatically carried out. The date and time for initial start-up can be set.
Notes:
Devices with no index label (e.g. RTR top unit with clock, item no. 0389 xx)
In the case of devices with no index label, the rate deviation factor must be noted before performing the reset. You can find this factor on the back of the top unit. Once you have programmed the time and date, set the rate deviation as follows:
Devices with index label (e.g. RTR top unit with clock, item no. 0389 xx) index: I00)
In the case of devices with an index label, the rate deviation correction factor is permanently stored in the EEPROM.
The abrasion resistance of our black matt and anthracite devices has been tested.
Test method:
In accordance with DIN EN 60068-2-70 with abrasion equipment from INNOWEP GmbH, 10,000 test cycles: the surface painted in anthracite and black matt passed the abrasion test mentioned.
Send us an E-mail. We will reply to you in writing as soon as possible.
We would be happy to advise you.
Monday to Thursday 9:00am – 5:00 pm Friday 9:00 am – 12:00pm