FAQ
Door station/removing or exchanging inscription labels
How can the inscription labels on the door station TX_44 be removed or changed? Can this be done by customers?
The inscription labels can also be removed or swapped by customers relatively easily without having to use any special tools. To remove or swap an inscription label, follow these steps:
- Remove the call-button cover plate, using a screwdriver for example.
- Remove the inscription label.
- Affix a new inscription label, if required.
- Reattach the call-button cover plate.
Relevant Products
Gira DCS mobile: door communication via app
Control your intercom with your smartphone: thanks to Gira DCS mobile, you can talk to visitors or open the door from anywhere. How it works ➔
Gira door station
With the Gira door station, you will know immediately who's ringing your bell. Water-proof and engravable surface in high-quality design.
Similar Questions
Basic system information for Gira door communication can be found here.
Electrical devices may only be installed by a qualified electrician. Please see the information at https://www.gira.de/service/bauherren/installationshinweis.html
The door communication system covers all products known generally as door intercom systems: i.e. door stations for your house door, home stations for communication with someone at the door and various control devices required for certain functions.
The DCS-TC gateway is the connection between the door communication system and an analogue telephone or an existing telephone system. The DCS-IP gateway is the IP network interface used, for example, to integrate an external IP camera and the Gira HomeServer into the TCS system or to enable forwarding to mobile Android or iOS end devices. Further functions are described in the technical documentation available in our download section here.
You can establish a connection between the door communication system bus and the existing (ISDN) telephone system or router (e.g. Fritzbox) with similar connections or a similar exchange connection via the TC gateway.
Please note that the programming set with item no. 1291 00 is required in all cases when connecting to the router. This is necessary in order to programme special characters (that are necessary to dial into the router) into the DCS-TC gateway.
Electrical devices may only be installed by a qualified electrician. Please see the information at https://www.gira.de/service/bauherren/installationshinweis.html
Can’t find what you were looking for?
Please
call us
We're happy to help.
+49 2195 602 6996
Monday to Friday 7.30 AM to 8.00 PM
Saturday from 8.00 AM to 12.00 PM