When used in conjunction with various System 2000 flush-mounted inserts, the Gira presence detector Komfort makes an array of lighting controls available. It switches the light on or off depending on the brightness level and movement in the room or provides convenient constant light control. With constant light control, it controls the lighting in such a way that the brightness of the room is constantly maintained at the desired level and fluctuations in natural daylight are smoothly balanced out with artificial light.
Several presence detectors and automatic control switches can be connected in parallel to expand the detection field. The Gira presence detector Komfort can be used on all System 2000 flush-mounted inserts and on the auxiliary unit for presence detectors and automatic control switches. As a constant light controller, the presence detector operates using the dimming inserts and the 1-10 V control device. As a 2-point controller, it uses the switch inserts. In addition, the lighting can be switched on or off manually via a simple installation button on the auxiliary input. It can also be dimmed with the System 2000 auxiliary unit.
The System 2000 presence detector Komfort top unit can be operated with the System 2000 impulse insert for motion dependent light control, e.g. in staircases. When activated, the impulse insert sends a pulse to the timer in the distributor, which then switches on the light for a specified time. The response threshold for each device in the lighting system can be individually set to suit the ambient conditions using the potentiometer for initial switch-on brightness in the presence detector top unit Komfort. The power-on time is set centrally at the automated timer in the distributor cabinet.
Ø 8 m
230 V AC, 50 Hz
1 s Test mode approx. 10 s to 30 min
approx. 10 to 1000 lux
Ø 103 mm x H 63 mm