Easy installation and start-up

System explanation

Dealing with technology becomes simple with the Gira door communication system concept. Installation without wasting time and effort on cabling during renovation projects and system configuration without any need for all tenants to be present – made possible by 2-wire bus technology and the concept of one-person start-up. With the Gira door communication system, video functionality is also possible in properties with up to 28 residential units. Gira has integrated door communication into the world of design lines for this purpose. Gira home stations are available in a variety of designs, and different colours can be combined with an extremely wide range of frame options.

Product range

The Gira door communication system provides solutions for all indoor and outdoor requirements: Single-family to multi-family homes, flush-mounted or surface-mounted installation, audio and video functions, use via the Gira Control Clients and PC, integration in Gira systems and systems from other manufacturers, integration of external cameras, keyless access with Gira Keyless In and vandalism-resistant door stations.

Installation

Gira makes technology simple. Installation without wasting time and effort on cabling and configuration without any need for all tenants to be present – made possible by 2-wire bus technology and the concept of one-person start-up.

2-wire bus:

In technological terms, the Gira door communication system is based on the 2-wire bus, whereby only two wires are needed to supply the components with power and to transmit all the audio and video signals. This means that an existing doorbell system can be easily replaced by the Gira door communication system, for example. Instead of routing new cables, existing cables are used. Also, in new installations, 2-wire bus technology reduces the otherwise normal cabling effort for a door intercom and enables rapid, non-interchangeable installation.

Simple programming due to one-person start-up

The Gira door communication system can be programmed in a cost-saving manner by just one installation engineer, which is also helpful for subsequent maintenance work. Commissioning the system is easy. Firstly, the call buttons on the door station are pressed for three seconds each in the order that the home stations are to be subsequently assigned in. Then, the home stations are processed one after the other by pressing the 'Light' button each time. Alternatively, the stations can be processed by pressing the floor call button. The advantage of this is that the tenants do not need to be present to set up the system.

Door communication planning tool

Electrical specialists obtain further information about the Gira door communication system in the 'Planning tool'. It contains basic knowledge relating to sample plans and connections, cable routing, project planning and more besides. Order no. 1736 10

Online course

Electricians can find tutorials on Gira systems at the websitewww.akademie.gira.de. A course about the Gira door communication system is also available there. The advantage of online learning is that the user can decide for themselves when, how and where to study. If the user runs out of time, the course can be paused and resumed at a later date. Multimedia preparation of diversified content makes it more fun and further links offer valuable additional information. Those wishing to learn simply need to sign up on the website and can then start with the tutorials straight away.

Extended number of devices

The Gira door communication system with video functionality can be installed in buildings with up to 28 home stations. When planning the system, it has often already been determined how many home stations will be installed per residential unit. Up until now, it was assumed that up to three home stations could be called at the same time per call button. That limited the maximum number of devices to 18. In larger properties, however, often only one home station is used per residential unit. The Gira door communication system now takes this into account. It is possible to design the system so that a call button is connected to just one home station. Differing equipment in the residential units is possible when the number of devices is reduced accordingly. This can be read from a gradation overview during system planning. It specifies the maximum number of devices to be used for the relevant set-up. If one home station is connected per residential unit, video functionality can be implemented using the Gira door communication system in up to 28 residential units. Twelve residential units can be equipped if there are two home stations per residential unit. If three home stations are installed per residential unit, a maximum of six residential units can be equipped with video functionality. An overview of the equipment possibilities:

1 home station per unit:
- 28 residential units
- 28 home stations

2 home stations per unit:
- 12 residential units
- 24 home stations

3 home stations per unit:
-  6 residential units
- 18 home stations

Door communication

TOP

Gira uses cookies for websites in the gira.com domain. By using our website, you agree to the use of cookies. Our Data Protection Declaration contains more information about the cookies used by us or third parties and the ways in which you can deactivate cookies.

Ok