Call triggering elements

Call and presence button

The Gira call and presence button is equipped with one red and one green button. The red button is used to trigger calls, and the green one is used to indicate presence, prepare emergency calls, forward calls and cancel calls.

Call and switch-off button with ancillary plug contact

In addition to the red and the green button for triggering calls and indicating presence, preparing emergency calls, forwarding calls and cancelling calls, the Gira call and switch-off button has an ancillary plug contact to connect pear and multiple buttons, a wireless set or other mobile control devices.

Call and doctor alert button

The Gira call and doctor alert button is equipped with one blue and one red button. The blue button can be used to call a doctor for assistance. The red button is used for triggering calls/emergency calls.

Call button

The call button is equipped with a red button, which is used for triggering calls. In addition to the simple model, there is also a call button with a diagnostic jack and/or ancillary plug contact.

Doctor alert button Blue

The Gira doctor alert button Blue features a blue button that calls a doctor for assistance. The connection to a room terminal or room module is established within the Gira nurse call system.

Room module with call and presence button

The Gira room module is the central control unit for a room. It is equipped with one red and one green button. The red button is used to trigger calls, and the green one is used to indicate presence and as a switch-off button.

Pear button

The Gira pear button is a patient control device with call triggering and location light or reassurance light. It is connected to a call button with an ancillary plug contact using the 2 m long power cord and the 8-pole plug.

Multiple button

The Gira multiple button is a patient control device with a call button and with either one or two light buttons. Calls/emergency calls are triggered using the red button with location light or reassurance light. The room light or a reading light can be switched with the yellow light button.

Pull-cord button

The Gira pull-cord button is used to trigger calls/emergency calls using a 2.5 m pull cord and can be installed in any location. The button is immediately accessible if someone needs help.

Pneumatic call button

The Gira pneumatic call button with a red rubber ball is used to trigger calls/emergency calls using a 2.3 m transparent plastic tube. It is primarily used in bathrooms (e.g. on the bath tub).

Call module

The Gira call module forms part of the emergency set and can also be re-ordered individually to extend the system. Within the set, the call module forms the central unit to which all the signals are transferred.

The delivery results subject to countries specific assortments

Gira nurse call system

TOP

Gira uses cookies for websites in the gira.com domain. By using our website, you agree to the use of cookies. Our Data Protection Declaration contains more information about the cookies used by us or third parties and the ways in which you can deactivate cookies.

Ok