Gira KNX presence detector Mini Standard

The discrete form of light and climate control

With its subtle, flat design, the new Gira KNX presence detector Mini Standard is an ideal choice for properties with demanding architectural requirements. It detects even the smallest movements in the room and enables automatic control of various functions in the KNX system, depending on presence. For example lighting, heating, or ventilation can be controlled entirely as required and in an energy-efficient manner. Thanks to different versions for ceiling mounting, flush-mounted installation, and surface-mounted installation, Gira KNX presence detector Mini Standard can be used both indoors and outdoors.

  • Subtle appearance
  • Diverse potential applications
  • Short-term presence function for conference or training rooms
  • Precise presence and motion detection across 360°
  • Flexible ceiling mounting concept
  • Daylight-dependent lighting control
  • Energy-saving optimisation through adaptive overrun time

Subtle appearance

Thanks to its subtle design, the Gira KNX presence detector Mini Standard blends unobtrusively with its surroundings. The design rings can be given a colour coating so that they match the wall or ceiling, as desired.

Flexible ceiling mounting concept

The flexible housing design ­makes the Gira KNX presence detector Mini Standard suitable for use in all ­rooms and areas. Its IP 44 protection means that it can even be installed outdoors or in rooms with high humidity. The Gira KNX presence detector Mini Standard is available in 'ceiling mounting' (standard model), ­'flush-mounted box installation', and 'surface-mounted' versions.

Diverse potential applications

The Gira KNX presence detector Mini Standard can be used as an individual device, main unit, or auxiliary unit, and is thus suitable for equipping a wide range of properties. When used as a main unit or auxiliary unit, semi-automatic, as well as fully-automatic control is possible. There is a choice of three preconfigured operating modes: presence detector, ceiling monitor and alarm device. It can also be combined with other Gira KNX presence detectors.

Daylight-dependent lighting control

An integrated brightness sensor measures the current light intensity, thus providing the option of lighting control depending on the daylight available. This means that the lighting is only switched on when the room is not bright enough. If there is sufficient daylight, the lights stay off. The dusk stage of the brightness sensor can be set via the ETS, by teach-in function on the device, or using communication objects such as the Gira touch sensor 3.

Short-term presence function for conference or training rooms

The short-term presence function is available as an addition to the adaptive overrun time especially for light and climate control in conference and training rooms. If the Gira KNX presence detector Mini Standard detects motion only briefly, it selects the minimum overrun time regardless of the self-taught adaptive value. As a result, lighting, heating, and ventilation will not remain switched on unnecessarily if somebody enters the room temporarily during a long conference break, e.g. the cleaning staff or catering service.

Energy-saving optimisation through adaptive overrun time

The Gira KNX presence detector Mini Standard offers the option of continuously analysing user behaviour, thereby independently optimising the overrun time (transmission delay). This saves energy and conserves the light source by preventing unnecessary switching on and off. The longer the period during which people are detected in the room, the longer the overrun time. If a room is only entered sporadically for short periods of time, the Gira KNX presence detector Mini Standard will reduce the overrun time. The minimum and maximum values can be freely defined.

Precise presence and motion detection across 360°

The device is equipped with three digital PIR sensors which cover a range of 360° (3 x 120°). The sensitivity of the sensors can be adjusted and flexibly adapted to individual installation scenarios – which enables movements to be reliably detected and prevents accidental triggering. In addition, the range of detection can be limited using a clip-on screen.

Installation

The Gira KNX presence detector Mini Standard is designed to be mounted on the ceiling. It can be installed indoors and outdoors. The flexible installation concept has a great number of installation advantages. As standard, products are shipped as mounting type 'ceiling-mounted' for indoor use. To install the devices, a hole is cut into the ceiling by the installer, who then inserts them into the ceiling and fastens them in place with spring clamps. In combination with different mounting kits for flush-mounted box installation and surface-mounted installation, it is possible to install the devices in existing flush-mounted boxes, or to mount them on surfaces unsuitable for flush-mounted boxes. The devices can also be installed outdoors or in rooms with high humidity. All operating elements on the device are accessible from the front and can be reached by removing the corresponding design ring. The design rings can be painted over.

Start-up

The system is activated via ETS. The KNX product database is based on the Gira KNX presence detectors' software, meaning that no familiarisation with a new subject matter is necessary.

Technical data

Motion detection:

Angle of detection:
360°

Range:
approx 12 m Ø (mounting height 3 m)

Brightness sensor:

Measurement range:
10 to 2000 lx

Range of detection:
5 m

KNX connection:

Connection and junction terminal

Ambient temperature:

-25°C to +55°C

Relative humidity:

10 to 100% (no condensation)

Protection type:

IP 44

Protection class:

III

Dimensions:

Ceiling cut-out:
Ø 44 mm

with small design ring:
Ø 53.5 × H 38 mm

Design/awards

Product design:

Gira Design Team,
Radevormwald

Awards:

ICONIC Awards 2014
Winner of the Product Building Technologies category

Plus X Award 2014
for high quality, design, operating convenience, and functionality

The delivery results subject to countries specific assortments

KNX presence detector Mini

TOP

Gira uses cookies for websites in the gira.com domain. By using our website, you agree to the use of cookies. Our Data Protection Declaration contains more information about the cookies used by us or third parties and the ways in which you can deactivate cookies.

Ok