Gira KNX blind actuators

Gira KNX blind actuator, 4-gang 230 V AC

Device variants

The KNX blind actuators with manual actuation are available in the following device variants:

  • 4-gang 24 V DC with manual actuation
  • 2-gang 230 V AC with manual actuation
  • 4-gang 230 V AC / 12–48 V DC with manual actuation
  • 8-gang 230 V AC / 12–48 V DC with manual actuation

 

Functions

  • Independent control of 2, 4, or 8 blind outputs
  • Automatic hanging moving time detection for 230 V AC drives with mechanical end-position switches
  • Position of hanging can be controlled directly
  • Slat position can be controlled directly
  • Behaviour in the event of bus voltage failure and recovery can be set
  • Separately parameterizable movement times with movement time extension for movements into the upper end position
  • Central control of all blind outputs possible
  • Feedback on the hanging or slat position. Active or passive cyclical feedback functions (object can be read out).
  • Feedback can be delayed until after the bus voltage is restored
  • Assignments of up to 5 different safety functions (3 wind alarms, 1 rain alarm, 1 frost alarm), with cyclical monitoring as an option
  • Forced setting function can be realised for each blind output
  • Inclusion in scenes possible, maximum of 8 internal scenes can be parameterized per channel
  • Memory function for light scenes
  • Sun protection function with fixed and variable hanging or slat positions can be activated
  • Extended sun protection with extensive control functions
  • Can be integrated into the building's temperature management system
  • Blocking of individual outputs manually or with bus

Technical data for the 4-gang variant 24 V DC

Switching voltage DC

DC 12 to 48 V

Switching capacity DC 12/24 V

6 A

Switching capacity DC 48 V

3 A

Connections

KNX via connection and junction terminal 0595 00
Load via screw terminals
0.5 to 4 mm² single-wire/fine-wire
without core jacket
0.5 to 2.5 mm² fine-wire
with core jacket

Dimensions

6 A

Switching capacity DC 48 V

DRA device with 4 HP

Technical data of the 2-gang variant 230 V AC

Operating voltage

AC 230 V, 50/60 Hz

Switching voltage AC

AC 230 V, 50/60 Hz

Switching capacity AC 230 V

6 A / AC1

Connections

KNX via connection and junction terminal 0595 00
Load via screw terminals
0.5 to 4 mm² single-wire/fine-wire
without core jacket
0.5 to 2.5 mm² fine-wire
with core jacket

Dimensions

DRA device with 4 HP

Technical data for the 4-gang and 8-gang variant 230 V AC / 12–48 V DC

Operating voltage

AC 230 V, 50/60 Hz

Switching voltage AC

AC 230 V, 50/60 Hz

Switching capacity AC 230 V

6 A / AC1

Switching voltage DC

DC 12 to 48 V

Switching capacity DC 12/24 V

6 A

Switching capacity DC 48 V

3 A

Connections

KNX via connection and junction terminal 0595 00
Load via screw terminals
0.5 to 4 mm² single-wire/fine-wire
without core jacket
0.5 to 2.5 mm² fine-wire
with core jacket

Dimensions

DRA device with 4 or 8 HP

VDE approval in accordance with

EN 60669-1, EN 60669-2-1, EN 50428

The delivery results subject to countries specific assortments

Blinds, roller shutters and window control

TOP

Gira uses cookies for websites in the gira.com domain. By using our website, you agree to the use of cookies. Our Data Protection Declaration contains more information about the cookies used by us or third parties and the ways in which you can deactivate cookies.

Ok