Gira wireless blind control

Operate blinds, roller shutters or awnings conveniently by remote control from your armchair: with the wireless control button and the wireless hand-held transmitter Komfort from the Gira wireless bus system. This lets you control blinds in different rooms simultaneously, for example. Connected sun sensors automatically protect furniture and plants from too much sun. Even if no one is home.

Settings, function

The reaction of the buttons of the wireless blind controller varies: For example, a brief press of the button (< 1 s) adjusts the slats, and a long press of the button (> 1 s) activates the extended blind run. The same actions can also be performed using the Gira wireless remote control. The control button can be locked electronically. The blind controller also offers wireless connection options for various sensors.

Sensor analysis

The wireless blind controller has connection options for various sensors. The Gira sun and twilight sensors are suitable for protection against direct sunlight. They aim for an average brightness level of approx. 20,000 lux (brightness of an overcast summer day). In addition, glass-breakage sensors can be coupled with the electronic blind controller. They lower the blinds in case of a shock to the glass, glass breakage or forced entry. The sensor cable is wirelessly connected to the control button or blind controller insert via a screw terminal.

Blind controller insert without auxiliary input

  • Motor protection through mechanically interlocked relay contacts with a minimum switching time of 1 second
  • Rated voltage: 230 V, 50 Hz
  • N conductor required
  • Switching capacity: max. 1000 VA
  • Relay output: 2 NO contact relays
    (non-isolated and mechanically interlocked)

Blind controller insert with auxiliary input

  • Mechanical buttons or additional blind controller inserts can be connected via 230 V auxiliary inputs to set up group controls
  •  ' Wind alarm function' can be realised via auxiliary inputs
  • Motor protection through mechanically interlocked relay contacts with a minimum switching time of 1 second
  • Rated voltage: 230 V, 50 Hz N conductor required
  • Switching capacity: max. 1000 VA
  • Relay output: 2 NO contact relays
  • (non-isolated and mechanically interlocked)

Technical data

Power supply

from flush-mounted insert

Switchover time on change of direction of movement

approx. 1 s

Reception frequency

433.42 MHz

Temperature range

0°C to +55°C

The delivery results subject to countries specific assortments

Blind control

TOP

Gira uses cookies for websites in the gira.com domain. By using our website, you agree to the use of cookies. Our Data Protection Declaration contains more information about the cookies used by us or third parties and the ways in which you can deactivate cookies.

Ok