Actuators

Wireless switching actuator 4-gang DRA

A variety of functions, such as light applications in a building, can be centrally and wirelessly controlled with this Gira switching actuator.

Wireless switching actuator 1-gang DRA

The Gira wireless switching actuator 1-gang DRA receives wireless telegrams for switching electrical loads (~ 230 V AC/10 A) from the DRA wireless receiver module via a separate data line.

Wireless universal dimming actuator, 1-gang DRA

The Gira wireless universal dimming actuator 1-gang DRA receives wireless telegrams for switching and dimming various electrical loads from the wireless receiver module via a separate data line.

Wireless blind actuator 1-gang DRA

The Gira wireless blind actuator 1-gang DRA receives wireless telegrams for controlling a blind or roller shutter drive from the wireless receiver module via a separate data line.

Wireless control unit 1-10 V, 1-gang DRA

Fluorescent lamps with 1–10 V ballasts or electronic transformers with a 1–10 V control input can be switched or dimmed with the Gira wireless control unit 1–10 V.

DRA wireless receiver module

The Gira wireless receiver module is installed in a distributor along with Gira DRA wireless actuators and wired to them.

Additional wireless antenna

The Gira additional wireless antenna is required if a Gira DRA wireless receiver module is mounted in a metal distributor.

Wireless switching actuator Mini

The Gira wireless switching actuator Mini switches electrical loads wirelessly. Thanks to its compact design, there is enough room for the device in a light canopy, for example.

Wireless momentary-contact actuator Mini

The Gira wireless momentary-contact actuator Mini enables electrical loads to be switched wirelessly for the duration of sensor actuation. 

2-channel wireless switching actuator Mini

The Gira 2-channel wireless switching actuator Mini wirelessly switches two electrical loads independently of one another. Thanks to its compact design, there is enough room for the device in a light canopy, for example.

Wireless blind actuator Mini

The Gira wireless blind actuator Mini enables wireless remote control of a blind or roller shutter motor and can adjust the slats and move the blind based on the actuation of a wireless transmitter. 

Wireless switching actuator

With its slim design, the Gira wireless universal switching actuator can be installed in the tightest of spaces – in suspended ceilings, for example. This makes it possible to switch kitchen counter or display cabinet lights on or off from the door using the wireless wall transmitter or to integrate them into light scenes. 

The delivery results subject to countries specific assortments

Wireless bus system

TOP

Gira uses cookies for websites in the gira.com domain. By using our website, you agree to the use of cookies. Our Data Protection Declaration contains more information about the cookies used by us or third parties and the ways in which you can deactivate cookies.

Ok