Gira presence detector Kompakt

Gira presence detector Kompakt

With its integrated power unit, the presence detector Kompakt controls the lights in offices and at other workplaces based on the incident daylight and human presence. So power is supplied only when it's really needed. The presence detector is surface-mounted on the ceiling and monitors the area below it.

If a certain brightness value is not reached, it switches on the connected lighting when movement is detected and switches it off again if there is sufficient daylight or no movement. The Gira presence detector Kompakt is available in pure white.

Possible applications, operation

Several presence detectors Kompakt can be connected in parallel to expand the detection field. In addition, the lighting can be switched on or off manually via a simple installation button on the auxiliary input.

Installation

The device can be installed either flush-mounted or surface-mounted using a surface-mounted housing. It has convenient connection space for lateral surface-mounted and rear flush-mounted cable feed of up to 2.5 mm².

Technical data

Angle of detection

360º

Nominal range desk height

Ø 5

Nominal range floor

Ø 8 m

Installation height for nominal range

2.5 m

Number of lenses/detection levels

80/6

Rated voltage

230 V AC, 50 Hz

Switch-on time

1 s Test mode approx. 10 s to 30 min

Brightness

approx. 10 to 1000 lux

Dimensions

Ø 103 mm x H 63 mm

The delivery results subject to countries specific assortments

Automatic lighting control

TOP

Gira uses cookies for websites in the gira.com domain. By using our website, you agree to the use of cookies. Our Data Protection Declaration contains more information about the cookies used by us or third parties and the ways in which you can deactivate cookies.

Ok