FAQ
Each X1 user receives their own password, which is stored in the app. There is no password protection for individual functions (as of app version 1.1.49).
A factory reset can be performed on the device on-site. Following this, the device password affixed to the device is reactivated.
Perform a factory reset as follows:
- -Disconnect the power supply
- -Hold down the programming button and connect the power supply
- -Hold down the programming button until both LEDs flash at the same time
- -Briefly release and re-press the programming button until the LEDs flash quickly
- -The factory reset is complete.
The Gira HomeServer MAC address is also the device serial number. This always consists of sets of two characters separated by hyphens. Example: 00-01-02-03-0A-0B.
The HomeServer logic differs in terms of the commands and outputs. The outputs can be used to send the results of the nodes to the KNX or link them directly to other nodes via PINS. Commands are used to trigger alarms, call up light scenes and sequences, etc. Please find attached a pdf document with important information on the basic working principles of the logic. You will also find a full description of the function blocks.
No, the X1 can only be operated via the app. The Gira X1 app is available for iOS and Android.
Can’t find what you were looking for?
Please
call us
We're happy to help.
+49 2195 602 6996
Monday to Friday 7.30 AM to 8.00 PM
Saturday from 8.00 AM to 12.00 PM